Jxin 70 is a one-component acrylic clear protective lacquer that forms a glossy, stretchable protective film on a variety of printed circuit boards. It can prevent the erosion of weak acid, alkali, alcohol, mold, salt spray, thermal stress, ultraviolet light, moisture, and insects. This product is resistant to high temperatures and will not drip when exposed to heat. It can be soldered directly on the protective film. Fully in line with EU ROHS directive requirements.
Features
1. Quickly form a tough, glossy and non-conductive protective film.
2, with excellent moisture, mold, salt spray, corrosion, electrical insulation, leakage resistance.
3. The protection period for electrical appliances, equipment and parts is long-lasting and the service life is prolonged.
4, high temperature resistance, the protective film begins to soften at 100 ° C, becomes sticky at 120 ° C but does not drip, can be directly soldered on the protective film.
Applications
Waterproof and moisture proof, improve insulation strength; isolate wire, cable, wire joints, screw joints, switch boxes and other air contact; for TV to prevent corona caused by leakage of components such as high voltage package; used to protect maps, charts, documents Soft materials such as drawings, manuscripts, etc.; prevent atmospheric erosion of high frequency antennas, TV antennas, radio antennas, etc.; protect wire boards, electronic parts, and electronic equipment from various chemicals, salt spray, moisture, electrical insulation, Impact of harsh environments such as dust, vibration and high and low temperatures.
Use process
1. Remove the dust, moisture (moisture) and oil on the surface of the object to be coated before use and keep it dry.
2. Shake well before use and during use.
3. It is forbidden to electrify and operate near fire source.
4. The best use temperature is 30 oC, and the nozzle is evenly sprayed from the target 15-30cm to keep the coating light and uniform.
5. If you want a thicker coating, the first layer can be sprayed after drying. The two sprays should be separated by 30 minutes to make the first coat dry, which makes the second coat more convenient.
6. After spraying, turn the can upside down and press the spray button until the gas is ejected to clean the injection valve.
7. The barreled product will volatilize during use, the viscosity will become thicker, you can add thinner to dilute it, please seal it when not in use.
Precautions
1. This product contains pressurized gas, please keep away from heat and open flame; do not pierce, impact or incinerate aerosol cans.
2. Keep away from children.
3. This product contains a slight odor and is slightly irritating to the skin and eyes. If it is accidentally splashed into the eyes, please rinse it with plenty of water immediately. If there is still discomfort, go to the hospital for examination. Please use soap and plenty immediately after skin contact. Rinse with water.
4. For more safety precautions of this product, please refer to Juxin's Material Safety Data Sheet (MSDS).
Packing specification
425ml / bottle, 12 bottles / box; 20 liters / barrel.
Storage conditions
1. Store in a cool dry place below 40 °C.
2. Storage period: 24 months.
3. If the product exceeds the shelf life, it should be confirmed whether there is any abnormality before use.
English
中文版